South East Queensland

Parts printed properly, up the road.

Send us an STL and tell us what the part has to survive. We print it on a Bambu Lab X1 Carbon with AMS, check it before it ships, and tell you honestly if there is a better way to make it.

Get a quote See the materials

Quote by return, usually same business day. Nothing charged until you agree it.

What we print

If it fits the bed, it is probably on this list

Replacement parts no longer sold Brackets and mounts Enclosures and housings Jigs and fixtures Prototypes and fit checks Cable management Signage and lettering Short-run production

Bed size is the real constraint. 256 × 256 × 256 mm in one piece. Bigger than that and we split it into parts and bond them — which is usually fine, and we will tell you up front what the seam will look like.

Why the machine matters

Most desktop printers are open-frame with a brass nozzle, which quietly rules out half the materials worth using. This one does not, and that changes what you can ask for.

An enclosed, heated chamber

ABS and ASA print properly instead of warping off the bed — so parts can live in a hot car or in Queensland sun
ASA is UV-stable where PLA goes chalky and brittle within a season
Fewer failed prints on tall or thin geometry

A hardened steel nozzle and AMS

PA-CF (nylon carbon fibre) and other abrasive filaments are possible at all — they destroy a brass nozzle in a few hundred grams
Up to 4 colours in one part from the AMS
First-layer inspection catches a bad start before it wastes a day

We would rather talk you out of the wrong material than print the right file badly.

How it works

1. Send the file .stl, .3mf, .step, .stp up to 100 MB each. No model yet? Describe the part and we will quote drawing it too.

2. We check it prints Wall thickness, overhangs, orientation and whether the material you picked is actually the right one. If it is not, we say so before you pay anything.

3. You get a price Material and machine time itemised, purge waste shown separately on multi-colour jobs, postage or pickup. Agree it and we print.

4. Pickup or post Pickup from Moreton Bay, or posted anywhere in Australia at cost.

Where we will not help

Easier to say now than after you have paid

Food containers and anything food-contact We do not sell 3D-printed parts as food safe. The layer lines in any FDM print trap bacteria no matter which filament is used, and food-contact certification applies to the raw filament, not the finished part. If a part needs to touch food, talk to us and we will point you somewhere appropriate.

Copies of parts you do not have rights to We will not reproduce someone else's commercial product or a licensed design. Replacement parts for something you own are fine.

Anything load-bearing where failure hurts someone Climbing gear, vehicle safety components, lifting points. FDM parts have a grain and fail along it. Ask us and we will point you at machining instead.

Firearm components No exceptions, regardless of legality.

Who we cover

BrisbaneMoreton BayCabooltureBribie IslandRedcliffeSunshine CoastIpswichLoganRedlandsGold Coast

Pickup from Moreton Bay; posted anywhere in Australia otherwise. Part of DyCom Group Queensland, so if the part is for a system we already look after, it lands on the same invoice.